HKEY_LOCAL_MACHINE\SOFTWARE\360Safe [2 8 19]
HKEY_LOCAL_MACHINE\SOFTWARE\360softmgr [2 8 19]
HKEY_LOCAL_MACHINE\SOFTWARE\360SD [2 8 19]
HKEY_LOCAL_MACHINE\SOFTWARE\360se [2 8 19]
HKEY_LOCAL_MACHINE\SOFTWARE\LiveUpdate360 [2 8 19]
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{87515F61-A66C-4319-A0E0-D416CB8059E3} [2 8 19]
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\360SafeLive.Update [2 8 19]
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\360SafeLive.Update.2 [2 8 19]
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{B69F34DD-F0F9-42DC-9EDD-957187DA688D} [2 8 19]
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Safemon.NavigatMon [2 8 19]
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Safemon.NavigatMon.1 [2 8 19]
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Interface\{76C72A7C-C0A6-4171-B3E4-6BD181AF41B6} [2 8 19]
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\360SelfProtection [2 8 19]
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\360netmon [2 8 19]
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\360SelfProtection [2 8 19]
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BAPIDRV [2 8 19]
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EfiMon [2 8 19]
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HookPort [2 8 19]
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\qutmdserv [2 8 19]
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\qutmipc [2 8 19]
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ZhuDongFangYu [2 8 19]

然后运行cmd，移动到anti360accessreg.ini文件路径，输入 regini anti360accessreg.ini 即可。

附上说明文件：
L:hacker>regini 
usage: REGINI [-m machinename | -h hivefile hiveroot | -w Win95 Directory] 
              [-i n] [-o outputWidth] 
              [-b] textFiles… where: -m specifies a remote windows NT machine whose registry is to be manipula 
ted. 
       -h specifies a specify local hive to manipulate. 
       -w specifies the paths to a windows 95 system.dat and user.dat files 
       -i n specifies the display indentation multiple.  Default is 4 
       -o outputWidth specifies how wide the output is to be.  By default the 
          outputWidth is set to the width of the console window if standard 
          output has not been redirected to a file.  In the latter case, an 
          outputWidth of 240 is used. b specifies that REGINI should be backward compatible with older 
           versions of REGINI that did not strictly enforce line continuations 
           and quoted strings Specifically, REG_BINARY, REG_RESOURCE_LIST and 
           REG_RESOURCE_REQUIREMENTS_LIST data types did not need line 
           continuations after the first number that gave the size of the data. 
           It just kept looking on following lines until it found enough data 
           values to equal the data length or hit invalid input.  Quoted 
           strings were only allowed in REG_MULTI_SZ.  They could not be 
           specified around key or value names, or around values for REG_SZ or 
           REG_EXPAND_SZ  Finally, the old REGINI did not support the semicolon 
           as an end of line comment character. textFiles is one or more ANSI or Unicode text files with registry data. The easiest way to understand the format of the input textFile is to use 
       the REGDMP command with no arguments to dump the current contents of 
       your NT Registry to standard out.  Redirect standard out to a file and 
       this file is acceptable as input to REGINI : 
           Semicolon character is an end-of-line comment character, provided it 
           is the first non-blank character on a line .  All 
           characters from the backslash up to but not including the first 
           non-blank character of the next line are ignored.  If there is more 
           than one space before the line continuation character, it is 
           replaced by a single space. Indentation is used to indicate the tree structure of registry keys 
           The REGDMP program uses indentation in multiples of 4.  You may use 
           hard tab characters for indentation, but embedded hard tab 
           characters are converted to a single space regardless of their 
           position , as they are associated with 
           the previous key at or above the value‘s indentation level. t create a value with leading or 
           trailing spaces, an equal sign or an at-sign in the value name, 
           unless you put the name in quotes. Valid value types and format of data that follows are: REG_SZ text 
              REG_EXPAND_SZ text 
              REG_MULTI_SZ “string1″ “str”"ing2″ … 
              REG_DATE mm/dd/yyyy HH:MM DayOfWeek 
              REG_DWORD numberDWORD 
              REG_BINARY numberOfBytes numberDWORD(s)… 
              REG_NONE (same format as REG_BINARY) 
              REG_RESOURCE_LIST (same format as REG_BINARY) 
              REG_RESOURCE_REQUIREMENTS (same format as REG_BINARY) 
              REG_RESOURCE_REQUIREMENTS_LIST (same format as REG_BINARY) 
              REG_FULL_RESOURCE_DESCRIPTOR (same format as REG_BINARY) 
              REG_QWORD numberQWORD 
              REG_MULTISZ_FILE fileName 
              REG_BINARYFILE fileName If no value type is specified, default is REG_SZ For REG_SZ and REG_EXPAND_SZ, if you want leading or trailing spaces 
           in the value text, surround the text with quotes.  The value text 
           can contain any number of imbedded quotes, and REGINI will ignore 
           them, as it only looks at the first and last character for quote 
           characters. REG_MULTI_SZ, each component string is surrounded by quotes.  If 
           you want an imbedded quote character, then double quote it, as in 
           string2 above. REG_BINARY, the value data consists of one or more numbers The 
           default base for numbers is decimal.  Hexidecimal may be specified 
           by using 0x prefix.  The first number is the number of data bytes, 
           excluding the first number.  After the first number must come enough 
           numbers to fill the value.  Each number represents one DWORD or 4 
           bytes.  So if the first number was 0×5 you would need two more 
           numbers after that to fill the 5 bytes.  The high order 3 bytes 
           of the second DWORD would be ignored. Whenever specifying a registry path, either on the command line 
       or in an input file, the following prefix strings can be used: HKEY_LOCAL_MACHINE 
            HKEY_USERS 
            HKEY_CURRENT_USER 
            USER: Each of these strings can stand alone as the key name or be followed 
          a backslash and a subkey path. REGINI: No textFile specified

       -

       Some general rules are

           Backslash character is a line continuation character

           Values should come before child keys

           For key names, leading and trailing space characters are ignored and 
           not included in the key name, unless the key name is surrounded by 
           quotes.  Imbedded spaces are part of a key name. 

           Key names can be followed by an Access Control List (ACL) which is a 
           series of decimal numbers, separated by spaces, bracketed by a 
           square brackets (e.g.  [8 4 17]).  The valid numbers and their 
           meanings are: 

              1  - Administrators Full Access 
              2  - Administrators Read Access 
              3  - Administrators Read and Write Access 
              4  - Administrators Read, Write and Delete Access 
              5  - Creator Full Access 
              6  - Creator Read and Write Access 
              7  - World Full Access 
              8  - World Read Access 
              9  - World Read and Write Access 
              10 – World Read, Write and Delete Access 
              11 – Power Users Full Access 
              12 – Power Users Read and Write Access 
              13 – Power Users Read, Write and Delete Access 
              14 – System Operators Full Access 
              15 – System Operators Read and Write Access 
              16 – System Operators Read, Write and Delete Access 
              17 – System Full Access 
              18 – System Read and Write Access 
              19 – System Read Access 
              20 – Administrators Read, Write and Execute Access 
              21 – Interactive User Full Access 
              22 – Interactive User Read and Write Access 
              23 – Interactive User Read, Write and Delete Access 

           If there is an equal sign on the same line as a left square bracket 
           then the equal sign takes precedence, and the line is treated as a 
           registry value.  If the text between the square brackets is the 
           string DELETE with no spaces, then REGINI will delete the key and 
           any values and keys under it. 

           For registry values, the syntax is: 

              value Name = type data 

           Leading spaces, spaces on either side of the equal sign and spaces 
           between the type keyword and data are ignored, unless the value name 
           is surrounded by quotes.  If the text to the right of the equal sign 
           is the string DELETE, then REGINI will delete the value. 

           The value name may be left off or be specified by an at-sign 
           character which is the same thing, namely the empty value name.  So 
           the following two lines are identical: 

              = type data 
              @ = type data 

           This syntax means that you can’

           For 

           For

报错信息：由于无法升级或重续本地计算机的客户端访问许可证，远程会话被中断。请跟服务器管理员联系。

故障分析：根据您的描述，我对您提出的问题的理解是：您的远程桌面连接收到错误信息“由于无法升级或重续本地计算机的客户端访问许可证，远程会话被中断”。

解决方法：请将“终端服务配置”中的“授权模式”更改为“每用户”。

操作步骤：
1、单击“开始”，指向“管理工具”，然后单击“终端服务配置”。
2、单击“服务器设置”，然后双击“授权模式”。
3、将“授权模式”更改为“每用户”，然后单击“确定”。
       （Windows 2003中可能为“授权”，而不是“授权模式”）

       但是，仔细分析一下，其实问题并没有出在服务器上，因为其他很多客户机都是可以正常访问的。最后我用TeamViewer连接过去看了半天，其实也没个头绪，反正就觉得问题应该在本地，肯定是本地计算机的客户端许可证的问题，随性我就把注册表里的 HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing 项，全部都删了。很暴力的想法，不能升级和续存，只要删了不就不存在续存和升级的问题啦？汗自己一个！~

     具体操作如下：点“开始”->“运行”，输入regedit,回车，打开HKEY_LOCAL_MACHINE\software\Microsoft\找到“MSLicensing”，并删除MSLicensing，用客户端重新登入即可。http://support.microsoft.com/kb/187614/zh-cn

Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOT\Directory\Background]

[HKEY_CLASSES_ROOT\Directory\Background\shellex]

[HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers]

[HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\New]
@=”{D969A300-E7FF-11d0-A93B-00A0C90F2719}”

[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Directory\Background\shellex\ContextMenuHandlers\New]
@=”{D969A300-E7FF-11d0-A93B-00A0C90F2719}”

本博客中的原创内容遵循Creative Commons(创作共用)授权,可保留本信息并<署名、非商业和保持一致>转载.

4、脱机文件

开启脱机文件选项卡内容在控制面板里的用户账户，更改用户登录和注销的方式，取消使用快速用户切换。

对应注册表设置为：

启用脱机文件：

登录时同步所有脱机文件

注销前同步所有脱机文件

显示提醒程序

在桌面上创建一个脱机文件的快捷方式

供临时脱机文件使用的磁盘空间（dword:可设置数值大小）

脱机文件-高级设置：

网络连接丢失时：

通知我，然后开始脱机工作。[0]

不允许计算机脱机工作。[1]

*原文地址：http://www.ysrh.com/index.php/windows-xp-folder-options-registry-corresponding-instructions-3/

 采用CC创作共用协议,可保留本信息并<署名、非商业和保持一致>转载.
怡水若寒/王聪的博客中的原创内容遵循以下授权 Creative Commons(创作共用)授权.

本部分内容若无特殊说明，值和数据均表示在以下注册表项内：

    2.1、不缓存缩略图

    2.2、管理网页和文件夹对

显示两部分并分别进行管理[1]

显示两部分但是作为单一文件进行管理[2]

作为单一文件显示和管理对[0]

    2.3、记住每个文件夹的视图设置

    2.4、使用简单文件共享（推荐）

    2.5、鼠标指向文件夹和桌面项时显示提示信息

    2.6、显示系统文件夹的内容

    2.7、隐藏受保护的操作系统文件（推荐）

    2.8、隐藏文件和文件夹

不显示隐藏的文件和文件夹[2]

显示所有文件和文件夹[1]

    2.9、隐藏已知文件类型的扩展名

    2.10、用彩色显示加密或压缩的NTFS文件

    2.11、在标题栏显示完整路径

    2.12、在单独的进程中打开文件夹窗口

    2.13、在登录时还原上一个文件夹窗口

    2.14、在地址栏中显示完整路径

    2.15、在文件夹提示中显示文件夹大小信息

    2.16、在我的电脑上显示控制面板

    2.17、在资源管理器文件夹列表中显示简单文件查看

    2.18、自动搜索网络文件夹和打印机

延伸阅读：Windows XP文件夹选项与注册表的对应说明(三)  

*原文地址：http://www.ysrh.com/index.php/windows-xp-folder-options-registry-corresponding-instructions-2/

 采用CC创作共用协议,可保留本信息并<署名、非商业和保持一致>转载.
怡水若寒/王聪的博客中的原创内容遵循以下授权 Creative Commons(创作共用)授权.

1、常规

    1.1、任务 

在文件夹中显示常规任务

 使用windows传统风格的文件夹

     1.2、浏览文件夹

在同一窗口打开每个文件夹

 在不同窗口打开不同的文件夹

     1.3、打开项目的方式

通过打击打开项目（指向时选定）

 根据浏览器设置给图标标题加下划线

    仅当指向图标标题时加下划线

 通过双击打开项目（单击时选定）

延伸阅读：Windows XP文件夹选项与注册表的对应说明(二) 

*原文地址：http://www.ysrh.com/index.php/windows-xp-folder-options-registry-corresponding-instructions-1/

 采用CC创作共用协议,可保留本信息并<署名、非商业和保持一致>转载.
怡水若寒/王聪的博客中的原创内容遵循以下授权 Creative Commons(创作共用)授权.